Siegmund Klambrisüsteem

Compose your individual devices from aluminum profiles and various cover and base plates according to your requirements and produce small to large series quickly, easily and inexpensively. You can work with your custom-made templates – whether laser parts or from the 3D Printer. The templates can be attached in the T-slot of the aluminum profiles with square nuts and screws. The templates are aligned via the table surface – as a basis we recommend Siegmund perforated plates, welding tables or slot tables. The height of the component is determined by the length of the aluminum profiles and can be individually adapted by cutting to size. The aluminum profiles are available in fixed lengths or as mass product.

The Siegmund clamping system is available in all systems and, as usual, can be combined with all the accessories in our product range.

Teie eelised

Individual fixtures can be assembled from aluminum profiles together with various cover and base plates. Small to large fixtures can be easily and quickly built at minimum cost.

Mallidega töötamine

Ükskõik, kas osad on laser- või 3D-printerist, saab neid T-soones oleva profiili külge kinnitada kandiliste mutrite ja kruvidega.

Individual height

Komponentide kõrgused on määratud alumiiniumprofiili pikkusega

Individual height adjustment from cut lengths

Profiilid saadaval kindla pikkusega.

Kokkusobivus

The fixture system is compatible with all the Siegmund product range.

Create your individual fixture system in only a few steps.

Alumiinium profiilid

for connecting base and cover plate

Individual height adjustment from cut lengths

T-Slots for attaching templates, e.g. laser templates, 3D printed parts, etc.

Toodete juurde

Adapteriplaadid

The base plates can easily be fixed to Siegmund perforated plates and welding tables using the system bore holes.

The cover plate serves as a tool holder, e.g. for quick-change clamps, squares or stops.

Toodete juurde

Quick-Change Clamps

Rapid clamping and release

Ergonoomiline fiksaatori käepide

Optional versions and sizes

Kõik Siegmundi augu süsteemiga

Nüüd saadaval ka koos adapteriga

Toodete juurde

Clamping claws

ideal for flat components

low interference contour

recommended for robot welding

flexible clamping range

reliable and precise fixation of workpieces

quick and easy operation

Toodete juurde

‹

›

Starter sets

Stardikomplekt 28

CS000176

CS000181

CS280192

800653.1.N

CS009001

CS009002

CS009003

CS009004

Consisting of:

4x CS000176 (Alumiiniumprofiil 100 T 500 mm)
4x CS000181 (Cover plate 100)
4x CS280192 (Alusplaat 175 radiaalne)
2x 800653.1.N (Spacer Ring for Premium Light pakendis 4)
1x CS009001 (Self-tapping screws M8x25 pakis 50 tükki)
1x CS009002 (kruve M8x12 pakis 50 tükki)
1x CS009003 (kruve M8x16 pakis 50 tükki)
1x CS009004 (mutreid M8 pakis 50 tükki)

Lisainfo

nõudmisel

Toote nr 4-CS280001.1

See artikkel on laos saadaval

Osta kohe

Stardikomplekt 22

CS000176

CS000181

CS220192

CS009001

CS009002

CS009003

CS009004

Consisting of:

4x CS000176 (Alumiiniumprofiil 100 T 500 mm)
4x CS000181 (Cover plate 100)
4x CS220192 (Alusplaat 170 radiaalne)
1x CS009001 (Self-tapping screws M8x25 pakis 50 tükki)
1x CS009002 (kruve M8x12 pakis 50 tükki)
1x CS009003 (kruve M8x16 pakis 50 tükki)
1x CS009004 (mutreid M8 pakis 50 tükki)

Lisainfo

nõudmisel

Toote nr 4-CS220001.1

See artikkel on laos saadaval

Osta kohe

Stardikomplekt 16

CS000176

CS000181

CS160192

CS009001

CS009002

CS009003

CS009004

Consisting of:

4x CS000176 (Alumiiniumprofiil 100 T 500 mm)
4x CS000181 (Cover plate 100)
4x CS160192 (Alusplaat 100 radiaalne)
1x CS009001 (Self-tapping screws M8x25 pakis 50 tükki)
1x CS009002 (kruve M8x12 pakis 50 tükki)
1x CS009003 (kruve M8x16 pakis 50 tükki)
1x CS009004 (mutreid M8 pakis 50 tükki)

Lisainfo

nõudmisel

Toote nr 4-CS160001.1

See artikkel on laos saadaval

Osta kohe

Montaažijuhised

Määrake ruudu kõrgus

Cut the aluminum profile to the required length
Pange tähele minimaalset lõikekõrgust
Ensure cut edges are square
Pärast saagimist eemaldage profiil

Kinnitage alusplaat

Fasten aluminum profile using self tapping screws
Kui kruvid on sisse keeratud, luuakse profiilile keere.
Thread cutting is not required with self tapping screws
Maksimaalne pöördemoment: 20 Nm

Insert square nuts

Sisestage kandilised mutrid alumiiniumprofiilide T-pilusse
For fastening customer-side templates (material thickness 5 – 6 mm) or optionally also lateral fastening of quick-change clamps with M8x12 screws

Fasten the cover plate

Fasten aluminum profile using self tapping screws
Kui kruvid on sisse keeratud, luuakse profiilile keere.
Thread cutting is not required with self tapping screws
Maksimaalne pöördemoment: 20 Nm

Kinnitustarvikud

Paigaldage kiirelt vahetatav klamber otse katteplaadile
The quick-change clamp can also be attached using an adapter
Võimalik on kinnitada klambrid, toed, fiksaatorid ja prismad süsteemis 16 avasüsteemis.

Clamp the device

Attachment to perforated plate, welding table or slot table with fast clamping bolts
If required, use a M8x12 screw to fasten the customized template to a square nut

‹

›

Suitable products

Siegmundi perforeeritud plaat - vastupidav tööpind

Ideaalne alus teie seadmetele.

Lisateavet

Toode on lisatud teie ostukorvi.

Teie ostukorv

Jätkake ostlemist