Professional Extreme

---

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal 100x100 mm ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

‐ Karastatud tööriistateras X8.7 + plasma nitreerimine
‐ Materjali paksus ligikaudu 24,5 – 27 mm
‐ Laua külgpaneel on kvaliteetsest terasest S355J2+N + plasma nitreerimine
‐ Tarvikute kinnitusavad Ø 28 mm
‐ Puuraugud pinnal diagonaalse ruudustikuna
‐ Nurgad, servad ja avad on ümardatud
‐ Laua külje kõrgus 200 mm
‐ Avad laua külgedel diagonaalvõrgustikus
‐ Mõõtkavaga pinnal
‐ Konstruktsiooni on tugevdatud ribidega
‐ Võrkjooned võimaldavad täpseid konstruktsioone
‐ Special equipment for welding tables available by request.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859 jaoks Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Toote nr 280859.1 jaoks Jala kõrgus reguleeritav System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Laua kõrgus:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.