Professional Extreme PLUS

---

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 17 – 19 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 22 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 250 mm
‐ Boreholes on table side 4 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1000 mm
Professional Extreme PLUS: 850 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1000 mm
Professional Extreme PLUS: 850 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1000 mm
Professional Extreme PLUS: 850 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1000 mm
Professional Extreme PLUS: 850 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1000 mm
Professional Extreme PLUS: 850 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1000 mm
Professional Extreme PLUS: 850 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load-bearing capacity of the leg is 1,500 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 950 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 700 – 1050 mm
Professional Extreme PLUS: 800 – 1150 mm

Leg with floor anchoring, load-bearing capacity of 1,500 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.