Stainless Steel

---

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 24,5 – 27 mm
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 14,5 – 17 mm (Since a bolt requires a clamping range of 50 mm, the lower material thickness can be compensated by an Adjusting Ring (Item No. 280653.N) with a thickness of 10 mm.)
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Borehole spacing of table side 50 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.