Professional Extreme PLUS

---

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Professional Extreme PLUS with increased table side height for special complex applications. More clamping options than previously available.

Thanks to the higher table side and ribbing, the rigidity of the table top is improved and deformation under loads is reduced.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 11,5 – 13 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 150 mm
‐ Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with Caster and Locking Brake, load-bearing capacity of 200 kg per caster, height-adjustable by turning the spacer plate by 30 mm (vernier adjustment), equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 200 kg and vernier adjustable up to 30 mm.

The specified load capacities refer to static load.

‐ Table height:
Basic: 650 – 950 mm
Professional 750 / Professional Extreme: 700 – 1000 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with Caster and Locking Brake, load-bearing capacity of 200 kg per caster, height-adjustable by turning the spacer plate by 30 mm (vernier adjustment), equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 200 kg and vernier adjustable up to 30 mm.

The specified load capacities refer to static load.

‐ Table height:
Basic: 650 – 950 mm
Professional 750 / Professional Extreme: 700 – 1000 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with Caster and Locking Brake, load-bearing capacity of 200 kg per caster, height-adjustable by turning the spacer plate by 30 mm (vernier adjustment), equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 200 kg and vernier adjustable up to 30 mm.

The specified load capacities refer to static load.

‐ Table height:
Basic: 650 – 950 mm
Professional 750 / Professional Extreme: 700 – 1000 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with Caster and Locking Brake, load-bearing capacity of 200 kg per caster, height-adjustable by turning the spacer plate by 30 mm (vernier adjustment), equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 200 kg and vernier adjustable up to 30 mm.

The specified load capacities refer to static load.

‐ Table height:
Basic: 650 – 950 mm
Professional 750 / Professional Extreme: 700 – 1000 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with Caster and Locking Brake, load-bearing capacity of 200 kg per caster, height-adjustable by turning the spacer plate by 30 mm (vernier adjustment), equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 200 kg and vernier adjustable up to 30 mm.

The specified load capacities refer to static load.

‐ Table height:
Basic: 650 – 950 mm
Professional 750 / Professional Extreme: 700 – 1000 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with Caster and Locking Brake, load-bearing capacity of 200 kg per caster, height-adjustable by turning the spacer plate by 30 mm (vernier adjustment), equipped with a reinforced arbor.

The specified load capacities refer to static load.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 200 kg and vernier adjustable up to 30 mm.

The specified load capacities refer to static load.

‐ Table height:
Basic: 650 – 950 mm
Professional 750 / Professional Extreme: 700 – 1000 mm
Professional Extreme PLUS: 750 – 1050 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg height-adjustable, adjustable within a range of 550-950 mm. Load-bearing capacity of 1,000 kg per leg remains constant at any height. A second locking bolt ensures additional stability. The Leg is vernier adjustable up to 40 mm.

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Basic: 600 – 1000 mm
Professional 750 / Professional Extreme: 650 – 1050 mm
Professional Extreme PLUS: 700 – 1100 mm

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.