Professional Extreme

---

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface 100x100 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

‐ Through-hardened tool steel X8.7 + Plasma nitration
‐ Material thickness approx. 24,5 – 27 mm
‐ Table side panel made of high quality steel S355J2+N + Plasma nitration
‐ Borehole Ø 28 mm
‐ Boreholes on the surface in diagonal grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 200 mm
‐ Boreholes on table sides in diagonal grid
‐ With scaling on the surface
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg with floor anchoring, load-bearing capacity of 2,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Standard Leg, available in various lengths (special lengths upon request). Load-bearing capacity 2,000 kg, adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 650 – 900 mm
Professional Extreme PLUS: 750 – 1000 mm
‐ Table legs not suitable for Basic tables.

Leg is height adjustability in a range of 450-700 mm or 550-900 mm. The load-bearing capacity remains 2,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg height-adjustable System 28) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 1100 mm
Professional Extreme PLUS: 850 – 1200 mm
‐ Table legs not suitable for Basic tables.

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

The specified load capacities refer to static load.

‐ Table legs not suitable for Basic tables.

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

The specified load capacities refer to static load.

‐ Table height:
Professional 750 / Professional Extreme: 750 – 950 mm
Professional Extreme PLUS: 850 – 1050 mm
‐ Table legs not suitable for Basic tables.